Verified construction product
HP SitePrint
An autonomous robotic construction layout system that prints full-scale CAD layout markings—including lines, points, arcs, and text—onto construction floors using robotic total-station positioning. Value Pack 3.0 / Robot Upgrade Kit 3.0 adds depth-camera smart navigation, obstacle shadowing for total-station line-of-sight protection, and related autonomy upgrades documented by HP.
Published technical facts
Specification record
- Battery runtime
- Two batteries supplied; each up to 4 hours of constant layout; combined for a full day of layout work (manufacturer-reported)
- CAD input format
- 2D DXF prepared from design/BIM models; HP documents a plug-in workflow for robot-ready files
- Documented Robotic Total Station compatibility
- Leica TS16/TS60, Leica iCON iCR80/iCR70; Topcon LN-150, GT-600, GT-1200; Trimble RTS 573 and S9 (manufacturer-documented partnership integrations)
- Current documented upgrade
- Value Pack 3.0 / Robot Upgrade Kit 3.0 (upgrade to the SitePrint robot; not a separate product identity)
- Floor deviation marking precision (high-accuracy setup)
- ±1/32 in (±0.8 mm) on average under the same high-accuracy setup conditions stated by HP
- Layout accuracy (high-accuracy setup)
- ±3/32 in (±2 mm) on average at 15.4–98.4 ft (5–30 m) with HP SitePrint SMR Prism, High Accuracy Print Mode, and a 1″ total station (HP footnote conditions)
- Operator requirement
- One person
- Positioning system
- Robotic Total Station tracking the robot prism for autonomous positioning
- Printable geometry
- Lines, points, arcs, and text
- Product family
- SitePrint
- Documented surface capability
- Porous surfaces (concrete, tarmac, plywood, pavement) and non-porous surfaces (terrazzo, vinyl, epoxy); can overcome concrete roughness/obstacles up to 2 cm thick
- Upgrade Kit 3.0 navigation speed
- Manufacturer states navigation speed can increase from 0.4 m/s to 0.7 m/s with the new electronic board and front bumper
- Upgrade Kit 3.0 operating-temperature extension
- Improved cooling extends maximum operating temperature from 40°C to 50°C (hardware path)
- Upgrade Kit 3.0 shadowing
- Avoids navigation into areas without Robotic Total Station line of sight when shadowing is enabled and obstacles are identified in CAD
- Upgrade Kit 3.0 smart navigation
- Depth camera plus Smart Navigation System for 3D obstacle assessment and dynamic route adaptation (hardware + software path)