Manufacturer intelligence
HP
Source-attributed product selection
HP SitePrint
Explore 1 published product and its source-attributed technical resources.
Headquarters Palo Alto, California, United States
Published manufacturer selection
Find a product or resource
1 published product selected from the manufacturer's wider catalog.
Showing 1 of 1 published product
HP SitePrint
An autonomous robotic construction layout system that prints full-scale CAD layout markings—including lines, points, arcs, and text—onto construction floors using robotic total-station positioning. Value Pack 3.0 / Robot Upgrade Kit 3.0 adds depth-camera smart navigation, obstacle shadowing for total-station line-of-sight protection, and related autonomy upgrades documented by HP.
- Battery runtime: Two batteries supplied; each up to 4 hours of constant layout; combined for a full day of layout work (manufacturer-reported)
- CAD input format: 2D DXF prepared from design/BIM models; HP documents a plug-in workflow for robot-ready files
Technical details and sources
- Battery runtime: Two batteries supplied; each up to 4 hours of constant layout; combined for a full day of layout work (manufacturer-reported)
- CAD input format: 2D DXF prepared from design/BIM models; HP documents a plug-in workflow for robot-ready files
- Documented Robotic Total Station compatibility: Leica TS16/TS60, Leica iCON iCR80/iCR70; Topcon LN-150, GT-600, GT-1200; Trimble RTS 573 and S9 (manufacturer-documented partnership integrations)
- Current documented upgrade: Value Pack 3.0 / Robot Upgrade Kit 3.0 (upgrade to the SitePrint robot; not a separate product identity)
- Floor deviation marking precision (high-accuracy setup): ±1/32 in (±0.8 mm) on average under the same high-accuracy setup conditions stated by HP
- Layout accuracy (high-accuracy setup): ±3/32 in (±2 mm) on average at 15.4–98.4 ft (5–30 m) with HP SitePrint SMR Prism, High Accuracy Print Mode, and a 1″ total station (HP footnote conditions)
- Operator requirement: One person
- Positioning system: Robotic Total Station tracking the robot prism for autonomous positioning
- Printable geometry: Lines, points, arcs, and text
- Product family: SitePrint
- Documented surface capability: Porous surfaces (concrete, tarmac, plywood, pavement) and non-porous surfaces (terrazzo, vinyl, epoxy); can overcome concrete roughness/obstacles up to 2 cm thick
- Upgrade Kit 3.0 navigation speed: Manufacturer states navigation speed can increase from 0.4 m/s to 0.7 m/s with the new electronic board and front bumper
- Upgrade Kit 3.0 operating-temperature extension: Improved cooling extends maximum operating temperature from 40°C to 50°C (hardware path)
- Upgrade Kit 3.0 shadowing: Avoids navigation into areas without Robotic Total Station line of sight when shadowing is enabled and obstacles are identified in CAD
- Upgrade Kit 3.0 smart navigation: Depth camera plus Smart Navigation System for 3D obstacle assessment and dynamic route adaptation (hardware + software path)
About this independent GCN brief ▾
Independently assembled from public sources. The manufacturer has not confirmed, claimed, or sponsored this profile. Product and project details are attributed to their publishers.
Company overview
The current GCN selection for HP includes HP SitePrint. Its product record links the published description, technical facts and official documentation to their sources.
Technical resources
System documentation 1 links
Official page 2 links
Contact pathways
Official manufacturer routes
- Visit HP official website ↗
Official company website